|Power:||Handwheel Or Cap Or Gearbox||Material:||Ductile Iron|
|Working Press:||PN10/PN16||Port Size:||DN50-DN800|
|Epoxy Resin Thickness:||≥250μm||Applicable Temperature:||0℃~+80℃|
|High Light:||DN800 resilient seated valves, Disk F5 resilient seated valves, DN800 f5 gate valve|
· Incorporating a full bore design.
· Seamless integration of copper nut and soft-sealing valve through embedded connection to eliminate
potential damage or loosening caused by water flow vibrations.
· Valve body protected by powder epoxy resin coating, preventing corrosion and enabling usage within
· Equipped with a valve stem featuring three O-ring seals, ensuring minimal friction, smooth operation, and
· Effortless operation due to low operating torque requirements.
· Each valve undergoes rigorous 100% testing and qualification before packaging and shipment.
· Design & Manufacturing: Conforms to DIN3202-F5
· Face to Face: Meets EN558-1 series 3, 14, 15 specifications
· Flanged Ends: Complies with ISO7005-2, EN1092-2, DIN2501 PN10/PN16 standards
· Inspection & Testing: Adheres to EN12266-1 requirements
· Operating Pressure: Available in PN10 / PN16 Bar variants
· Size Range: From 2″ to 32″ (DN50~800mm)
· Materials: Constructed from both cast iron and ductile iron
· Epoxy Resin Coating Thickness: Minimum of ≥250 microns
· Suitable Temperature Range: Applicable for temperatures ranging from 0℃ to +80℃
· Actuator Options: Can be equipped with handwheel, square cap, gearbox, or electric actuator.
Pre: Grooved Filter GL83H-16 Next: Socket End Resilient Seated Gate Valve DIN3202